Quick post with a new ghost that will help direct the TOTs in the right direction. I could not get him to work last year, so he was a static ghost holding a sign.
The stress on the moving joints was too much for the wooden dowel in in hole to manage. This year I used nylon bushings from Home Depot for the joint and they worked great. The result is shown below. As long as it survives running for a few hour I will add the cloak and cheese cloth back on.
Excellent! I want to try a Greeter for this year. Your notes and video are so very helpful! I’ve made static props, but I’m new to motorizing them. I’ve had two reindeer motors for several years but have been too intimidated to give it them a shot. 😂
ReplyDelete